| Q: |
Why should I consider an Automatic Plate Washing System when we’ve always had time to wash by hand?
|
| A: |
Automating the wash process helps to ensure a uniform quality
of wash every time. Additionally, pressroom health and safety standards will be enhanced by
eliminating hand washing which could lead to repetitive strain injuries and accidents as
well as removing the handling of detergents during the wash process.
>>> top
|
| Q: |
Is
the Oxy-Dry Automatic Plate Washing System difficult to operate?
|
| A: |
No, it is not. Intuitive touch screen technology
utilizing Allen Bradley controls creates a user-friendly interface. Comprehensive
training, detailed instructional manuals, coupled with Oxy-Dry’s worldwide service
and support capabilities, are available for an easy start up and commissioning.
Oxy-Dry’s fully integrated electronic controls offer leading edge technology for
its family of flexo press auxiliary products.
>>> top
|
| Q: |
How do I justify
the initial investment in plate washing technology?
|
| A: |
Oxy-Dry’s Automatic Plate Washing System will take three
(3) minutes to complete a full press wash. Therefore, increased production time and
overall pressroom productivity can offer a quick return on investment. Your Oxy-Dry
Sales Representative will be happy to run a custom Return On Investment Report for
your individual pressroom.
>>> top
|
| Q: |
Can I retrofit
an Automatic Plate Washing System on my existing flexo press?
|
| A: |
Yes. Oxy-Dry has an in-house Engineering Department experienced in custom designs for the retrofit market as well as designs for new press installations.
>>> top
|
| Oxy-Dry Interstation IR & UV Drying Systems
|
|
| Q: |
Why should I
consider an Oxy-Dry Interstation IR and/or UV Drying System for my press?
|
| A: |
IR Drying and/or UV Curing are proven ways to reduce drying
times allowing for increased press speeds. Today’s faster flexo presses require higher
press speeds to maintain their print quality. The Oxy-Dry System will dry multicolor
work at press speeds. The Oxy-Dry System is a superior choice for flexo presses because
it offers a unique approach utilizing IR Short Wave and IR Medium Wave technology
supported by air manipulation technology to maximize its drying power.
>>> top
|
| Q: |
What features distinguish the Oxy-Dry System from other drying systems on the market?
|
| A: |
An integrated IR Air Knife and Evacuator panel
is sized to fit tight space requirements yet, still offers high-powered
drying impact. A unique combination Board and Temperature Detection System
will immediately shut down the Oxy-Dry Drying System in the event of a
stray board thus protecting your press and eliminating valuable downtime.
>>> top
|
| Q: |
Is it true that
using IR and UV drying technology will help to make colors pop?
|
| A: |
Yes. Colors will brighten when exposed to both
spectrums. This dual exposure will evenly trap light and dark colors on
top of the sheet before it absorbs into the board and loses its luster.
>>> top
|
| Q: |
Can I
retrofit an Interstation IR and UV Drying System on my existing flexo press?
|
| A: |
Yes. Oxy-Dry has an in-house Engineering Department
experienced in custom designs for the retrofit market as well as designs
for new press installations provided adequate space is available
>>> top
|
